Mounting accessories
ecofix® Hook Tape
Transparent, self-adhesive Velcro for the simple, „dry“ and secure attachment of Silentum acoustic felt to walls and ceilings.
- Bonding on walls and ceilings
- Application: on rough surfaces, such as concrete, sawn timber, etc.
- High adhesive strength, even in the cold
- High age resistance
- Renovation-friendly The felt can be carefully removed.
- Operating temperature range: -40 °C to +80 °C
- Roller dimensionsWidth approx. 320 mm, length approx. 156,25 m
- Thickness: 1.09 mm (0.05 mm cover + 1.04 mm hook-tape)
Assembly
Operating Principle: The tape is secured and the felt connects to the tape using the Velcro principle. Assembly is quick, clean and odourless. For assembly, please note the following points:
- Perform adhesion test before assembly: Apply a piece of ecofix® to the designated area and check its adhesion. If it is sufficient, the installation can continue. Otherwise, prepare the surface with an adhesion primer (see video on the right).
- The substrate must be clean, dry, and free of dust.
- First, remove the ecofix® cover.
- Then lay/press ecofix® with the adhesive surface over the entire area
- Apply the cut Silentum acoustic felt and rub it in for a secure bond.
This is how it works: Step-by-step guide including video for professionally wallpapering acoustic felt to the wall or ceiling using ecofix® hook-tape.
Running metre calculator
The ecofix® Hook and Loop fastener has a Width of 320 mm. Here you can calculate how many linear metres of ecofix® you need to order to cover a certain area with Silentum acoustic felt.
m²
linear metres
More information
For more information about ecofix®, you can download the official manufacturer's data sheet here:
Delivery form
| Article No. | Thickness (mm) | Width (mm) | Length (m) | Delivery form |
|---|---|---|---|---|
| 200720 | 1,09 | 320 | 1 | Linear metre (minimum order quantity 1 m) |
